Creating Line Element And Zero-Phase Element - Toshiba RSM 100 Instruction Manual

1.6 Creating Line Element and Zero-
Phase Element
This section describes how to create new line element and zero-phase element form the
selected analog elements.
《Note for Operation》
● You can created line elements and zero-phase elements from the following elements:
● When you create a zero-phase element, it is registered in the phase order setting
《Operating Procedure》
① Click the element segment of the waveform from which you want to create a line or
1-24
→Vab
Va・Vb
→Vbc
Vb・Vc
→Vca
Vc・Va
Va・Vb・Vc →Vo
processed internally.
(The created zero-phase element is used for the analysis calculation.)
zero-phase element (only 1).
→Iab
Ia・Ib
→Ibc
Ib・Ic
→Ica
Ic・Ia
→Io
Ia・Ib・Ic
⎯ 100 ⎯
6 F 2 S 0 7 1 5