Download Print this page
Mitel 1000 Safety Instructions
Mitel 1000 Safety Instructions

Mitel 1000 Safety Instructions

Combined voice & data communications system
Hide thumbs Also See for 1000:

Advertisement

M I T E L
3000
www.mitel.com
Global Headquarters
U.S.
Tel: +1(613) 592-2122
Tel: +1(480) 961-9000
Fax: +1(613) 592-4784
Fax: +1(480) 961-1370
For more information on our worldwide o ce locations, visit our website at www.mitel.com/o ces
THIS DOCUMENT IS PROVIDED TO YOU FOR INFORMATIONAL PURPOSES ONLY. The information furnished in this document, believed by Mitel to be accurate
as of the date of its publication, is subject to change without notice. Mitel assumes no responsibility for any errors or omissions in this document and shall
have no obligation to you as a result of having made this document available to you or based upon the information it contains.
M MITEL (design) is a registered trademark of Mitel Networks Corporation. All other products and services are the registered trademarks of their respective
holders.
© Copyright 2008, Mitel Networks Corporation. All Rights Reserved.

Safety Instructions:

Mitel 1000
EMEA
CALA
Tel: +44(0)1291-430000
Tel: +1(613) 592-2122
Fax: +44(0)1291-430400
Fax: +1(613) 592-7825
Asia Paci c
Tel: +852 2508 9780
Fax: +852 2508 9232

Advertisement

loading
Need help?

Need help?

Do you have a question about the 1000 and is the answer not in the manual?

Questions and answers

Summary of Contents for Mitel 1000

  • Page 1: Safety Instructions

    THIS DOCUMENT IS PROVIDED TO YOU FOR INFORMATIONAL PURPOSES ONLY. The information furnished in this document, believed by Mitel to be accurate as of the date of its publication, is subject to change without notice. Mitel assumes no responsibility for any errors or omissions in this document and shall have no obligation to you as a result of having made this document available to you or based upon the information it contains.
  • Page 2 & cordless handsets and access the latest in ‘Voice over IP’ services. This User Guide will show you how to connect Mitel 1000 and how to customize its configuration to get the most out of your new product.
  • Page 3 • The mains power socket outlet must be located near the product and must be easily accessible to allow plugging/unplugging. • Do not allow anything to rest on the power cord. Do not locate this product where persons walking on it will abuse the cord. •...
  • Page 4 FCC Regulatory Information This equipment complies with Part 68 of the FCC rules and the requirements adopted by ACTA. On the exterior of the cabinet of this equipment is a label that contains, among other information, a product identifier in the format US:LKCMF01BSIGMA If requested, this number must be provided to the telephone company.
  • Page 5 Toll Restriction and Least Cost Routing Equipment The software contained in Mitel 1000 to allow user access to the network must be upgraded to recognize newly established network area codes and exchange codes as they are placed into service.
  • Page 6 Modifications Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. There are no user-serviceable parts or adjustments inside this equipment - please do not open the equipment case. Industry Canada Regulatory Information This product meets the applicable Industry Canada technical specifications/Le présent materiel est conforme aux...
  • Page 7 This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. Basic Requirements In order to use all the features of the Mitel 1000 system, you must have the following: DSL service up and running on your telephone line (or an equivalent broadband Internet access).
  • Page 8 You do not need to use a hub or switch in order to connect more than one Ethernet PC to your Mitel 1000. Instead, you can connect up to four Ethernet PCs directly to your Mitel 1000 using Note the ports labeled on the rear panel.
  • Page 9 THIS DOCUMENT IS PROVIDED TO YOU FOR INFORMATIONAL PURPOSES ONLY. The information furnished in this document, believed by Mitel to be accurate as of the date of its publication, is subject to change without notice. Mitel assumes no responsibility for any errors or omissions in this document and shall have no obligation to you as a result of having made this document available to you or based upon the information it contains.