Mitel 1000 Owner's Manual page 87

2. Click on Change Password settings here... The following page
is displayed:
3. This page allows you to enable or disable password protection.
Protection is already enabled by default. Click Next>. The
following page is displayed:
4. This page displays the current username and password
settings. Type your own unique username and password in the
relevant boxes. They can be any combination of letters or
numbers with a maximum of 20 characters. The default setting
uses admin for both the username and password. We
recommend that you do not set the same character
combination for both username and password.
5. Click Next>. The following page is displayed:
This page confirms that password protection is enabled and
displays the username that will be required in order to access the
web pages. If you are happy with these settings, click Confirm
Changes. The Enter Network Password login box is displayed. You
need to login to the web pages using your new username and
password. For details of how to do this, see Accessing the Web
pages on page 22.
87