Mitel 1000 Owner's Manual page 102

Disconnect
Use this option to functionally disconnect the extension from the
system (this option does not physically disconnect the extension).
Page Protection
When selected the extension in question will not receive pages from
Featurephones 'Page-all' calls.
Individual CLI store
You can program each extension to store five numbers each. Each
of these extensions will have a separate record of calls that ring on
CO lines programmed to ring their extensions only.
Ringing Frequency
This option allows the ringing frequency to be changed from the
default 25Hz to 50 Hz on individual extensions.
Reverse Cadence
Certain equipment connected to an extension position (such as
answering machines) may not ring correctly when an incoming call
is received.
This option allows the user to alter the incoming ringing cadence
(tempo) to facilitate such equipment.
Keypad confirmation
When Keypad confirmation is On a confirmation tone is heard when
dialing from the keypad on the Featurephone.
Language
Three language options are available for he text prompts on the
Featurephone. These are English, French and Spanish. The default
is English.
Hot Line
Extensions can be programmed so that they automatically dial a
number when they go off-hook. The number dialed can be an
extension or an external number.
Left mouse click on the field and enter the hotline number
associated with the extension. This is a telephone number up to 24
digits in length.
The user can enter another extension number, or an external
number as required (include 9 to seize the outside line).
Not Allowed to Open the Door
The selected extension cannot be used to open the door when a
call is placed over the doorphone.
External Forwarding
This option allows the administrator to enable or disable each
extension's facility to Forward calls to outside lines.
Selection range: Left mouse click on the field and a pull down list of
options is displayed:
•
No Trunk to Trunk (This setting means incoming external calls
cannot be Forwarded back out on another external line)
•
All Calls (Default: All call types (Internal & External) can be
Forwarded)
102