(4) Check your WLAN settings
The following procedure assumes that the WLAN has been set up with
WPA security.
If a different security configuration has been set up, refer back to
Section 10 Wireless Setup/Security
(a) Enter the Mitel 1000 Main menu
•
Select Wireless Settings/Security
In General Settings
(b) Is Wireless
Yes
network enabled ?
No
(c) Make a note of the Network Name
(d) Select
Allow Mitel 1000 to select a channel
(e) Select
Wi-Fi Protected Access (WPA) on the wireless network
Enable SSID Broadcast
(f) Re-enter the Pass Phrase and make a note of it
(g) Select
Allow any Wireless PCs to connect
Confirm changes
Restart the Mitel 1000
(h) Is the Wireless
LED on the Micro
Yes
Green ?
No
208
Go to (c)
•
Click Enable or disable the wireless
network here ...
•
Select Enable
•
Click Next
•
Go to (c)
Go to (1d)
Go to (5) Check your Wireless PC
settings