Mitel 1000 Owner's Manual page 144

Transport Type
Port Number Start
Port Number End
Secondary Port Number
Start
Secondary Port Number
End
Select "Security Trigger Configuration ..."
The following screen is displayed
Current security triggers are displayed. There is an option to delete
each entry.
Select "New Trigger"
The following screen is displayed
Enter the following parameters
Adds a trigger for a TCP or UDP application
Sets the start of the trigger port range for the control
session
Sets the end of the trigger port range for the control session
Sets the start port range that the trigger will open
Sets the end of the port range that the trigger will open
144