Mitel 1000 Owner's Manual page 202

5. In the Select Network Component Type dialog box, select
Protocol, and then click Add...
6. Select Internet Protocol (TCP/IP) in the Network Protocols list,
and then click OK.
7. You may be prompted to install files from your Windows 2000
installation CD or other media. Follow the instructions to install
the files.
8. If prompted, click OK to restart your computer with the new
settings.
Next, configure the PCs to accept IP information assigned by Mitel
1000:
9. In the Control Panel, double-click the Network and Dial-up
Connections icon.
10. In the Network and Dial-up Connections window, right-click the
Local Area Connection icon, and then select Properties.
11. In the Local Area Connection Properties dialog box, select
Internet Protocol (TCP/IP), and then click Properties.
12. In the Internet Protocol (TCP/IP) Properties dialog box, click the
radio button labeled Obtain an IP address automatically. Also
click the radio button labeled Obtain DNS server address
automatically.
13. Click OK twice to confirm and save your changes, and then
close the Control Panel.
Windows Me PCs
1. In the Windows task bar, click the Start button, point to
Settings, and then click Control Panel.
2. Double-click the Network and Dial-up Connections icon.
3. In the Network and Dial-up Connections window, right-click the
Network icon, and then select Properties.
The Network Properties dialog box displays with a list of currently
installed network components. If the list includes Internet Protocol
(TCP/IP), then the protocol has already been enabled. Skip to step
11.
4. If Internet Protocol (TCP/IP) does not display as an installed
component, click Add...
5. In the Select Network Component Type dialog box, select
Protocol, and then click Add...
6. Select Microsoft in the Manufacturers box.
7. Select Internet Protocol (TCP/IP) in the Network Protocols list,
and then click OK.
You may be prompted to install files from your Windows Me
installation CD or other media. Follow the instructions to install the
files.
8. If prompted, click OK to restart your computer with the new
settings.
9. Next, configure the PCs to accept IP information assigned by
Mitel 1000:
10. In the Control Panel, double-click the Network and Dial-up
Connections icon.
202