Mitel 1000 Owner's Manual page 134

Configure Wireless Network Security on page 125.
Configure address authentication; click Change which wireless PCs
are allowed to connect here... and follow the instructions in
Configure Wireless Address Authentication on page 128.
display information about the wireless PCs connected to the Mitel
1000; see Displaying details of Wireless PCs on page 134.
Displaying details of Wireless PCs
At the Wireless Network page, click on View details of connected
wireless PCs... The following page is displayed:
This page displays the MAC address of the PC currently connected
to your Mitel 1000, together with the signal strength. The signal
strength is the measure of radio frequency (RF) energy detected by
the Mitel 1000 on a specific channel. Signal strength may vary
depending on the position of the PC(s) in relation to the Mitel 1000.
To return to Wireless Network page, click on Return to the wireless
status page.
134