Mitel 1000 Owner's Manual page 162

Least Cost Routing
To set up codes to allow calls to be routed on specific lines or
networks
From the Programming Extension, press the PROGRAM Key
Press the Scroll Down Key ( ) until 'System programming' is
displayed.
Select 'System programming'.
Enter the System Programming Password and select 'Lines'.
Scroll Down and select 'LCR Codes' .
Select LCR On to activate the facility
Enter in a code index (01-50).
Enter an input code (Up to 5 digits). Press Confirm. This is the code
dialed by the user.
Enter an Output Code (Up to 9 digits). This is the code that will be
inserted before the telephone number that the user dials. This code
can be used to select a specific Network Provider.
Select the preferred or exclusive option.
If 'Exclusive' is selected the calls can only be sent on the lines
selected below.
If 'Preferred' is selected the calls will be routed on any available line,
if none of the selected lines are available. In this case the output
code is not dialed.
When Enabling or Disabling the LCR feature the new setting does
not take immediate affect. There can be a delay a of up to 1 minute
for the setting to take affect.
Least cost Routing activated automatically at set times
You can program the Least Cost Routing facility, to be automatically
turned on and off twice during a 24-hour period enabling you to
tailor your call charges through different service providers.
From the Programming Extension, press the PROGRAM Key
Press the Scroll Down Key ( ) until 'System programming' is
displayed.
Select 'System programming'.
Enter the System Programming Password and select 'Lines'.
Scroll Down until 'LCR Timebands' is displayed.
Select LCR on times
You can enter two 'On' times.
Select LCR off Times
You can enter two times at which the LCR facility is deactivated
A Third option 'LCR weekend' is offered. When this is selected the
LCR service remains active from Friday night to Monday morning,
all off times over the weekend are ignored.
Press the Speakerphone Key to finish programming.
To examine Extension Lock Passwords
From the Programming Extension, press the PROGRAM Key
Press the Scroll Down Key ( ) until 'System programming' is
displayed.
Select 'System programming'.
162