Basic Pabx Settings - Mitel 1000 Owner's Manual

•
Basic PABX Settings. (The most common settings for the
telephone system).
•
Router Configuration (This is only required if you are using a
Cable modem or private network).
•
Wireless Security / Setup. (To set up a wireless connection to
your PC(s).
•
Time and Date Settings (To set the Time and Date on the
phone system).

Basic PABX Settings

From this page you can configure the most commonly used
telephone system functions, which are:
•
Incoming Ringing. Selecting the phones that ring for incoming
calls.
•
Extension Names. Programming extension names so that the
names rather than extension numbers used on the
Featurephone.
•
Outgoing Restriction. You can restrict extensions from making
calls on particular lines.
•
Extension Class of Service. Restricting phones from making
particular types of call e.g. International calls
•
Cordless phone Registration. The cordless phones must be
registered on the system before they can be used to make
telephone calls
•
Line Forwarding. On Power up incoming calls are forwarded to
the Answering Machine if they are not answered within 18
seconds. The forwarding set for each line can be changed or
cancelled
Incoming Ringing
You can determine which phones ring for incoming calls. Calls on
each line can be set to ring different phones. You can also have
different phones ringing when the system is in night mode.
For example, in DAY mode, all calls on Line1 might ring all
phones, but in NIGHT mode all calls on Line 1 might be set to
only ring extension 20.
Also, in both DAY & NIGHT modes, all calls on IP Trunk 1 might be
set to ring on extension 23 only.
To change the settings, select ON or OFF from the relevant drop
down box for the Line/Extension configuration you require.
The default is that ALL lines ring ALL extensions in both Day and
Night Modes.
24