Mitel 1000 Owner's Manual page 161

Enter the System Programming Password and select 'System'.
Press the Scroll Down Key ( ) until 'Caller ID List' is displayed.
Select 'Caller ID List'.
Select 'Store All Calls' or 'Store Unanswered Calls'.
Press the Speakerphone Key to finish programming.
To set up extensions with an individual Caller ID List
You can program up to twelve extensions to store five numbers
each. Each of these extensions will have a separate record of calls
that ring on exchange lines programmed to ring their extensions
only.
From the Programming Extension, press the PROGRAM Key
Press the Scroll Down Key ( ) until 'System Programming' is
displayed.
Select 'System Programming'.
Enter the System Programming Password and select 'Extensions'.
Press the Scroll Down Key ( ) until 'Personal Caller ID List' is
displayed.
Select 'Personal Caller ID List'.
Select the extensions that you wish to have an individual Caller ID
list. The extensions with a Personal Caller ID list have a ♦ displayed
beside them.
Press the Speakerphone Key to finish programming.
Automatic line selection
This facility allows users to make external calls without having to
enter the line access codes (9,8). Internal calls are made by
pressing hookflash and dialing the number when using standard or
cordless phones or selecting the number from the internal call menu
on a Featurephone.
Press the Scroll Down Key ( ) until 'System Programming' is
displayed.
Select 'System Programming'.
Enter the System Programming Password and select 'System'
Select Automatic Line selection and select 'Automatic Line selection
On'.
Paging
To protect Featurephone against Announcements and Voice Calls
By default, all Featurephone may be paged. You can page-protect
each Featurephone to prevent it from being paged from either
Announcements or Voice Calls.
From the Programming Extension, press the PROGRAM Key
Press the Scroll Down Key ( ) until 'System programming' is
displayed.
Select 'System programming'.
Enter the System Programming Password and select 'Extensions'.
Select 'Page protection'
Select the extensions you wish to protect. A ♦ is displayed beside
protected extensions.
Press the Speakerphone Key to finish programming.
161