Mitel 1000 Owner's Manual page 97

System VM Capacity
This setting determines the number of messages that may be
stored in the answering machine.
Music on Hold Source
This options determines what a caller will hear when a call in placed
on Hold.
Select the required option below from the drop-down box.
Silence
Tone
External – selects an external music source connected via an
extension. See Music on Hold Extension, below.
Internal (Default – Internal system recording)
Answering Machine Password
The password can be between 1 and 8 digits long and can be any
number between 1 and 99999999
This is the password used to access the system answering machine
from extension 20.
Programming Password
The password is 4 digits long and can be any number between
0000 and 9999
This is the password used to access the programming functions on
the system when using a Featurephone programming position
Store All Calls in the Caller ID Lists
Use this setting to determine what received calls are recorded by
the system in the Caller ID Lists.
If set to OFF, only missed calls will be listed. If set to ON, all calls,
including answered calls will be listed in the Caller ID lists.
Doorphone Enable
Use this to enable the operation of a Doorphone connected via the
system.
Button Hopping
When Button hopping is enabled if you press a second line key
while on a call on another line the first call is disconnected. With
button hopping off the first call is placed on hold when the second
line key is pressed.
Line Key Light
This allows you to have the line key light flashing or steady when a
call is placed on hold. The default is flashing.
Night Services Start 1 (HHMM)
The time in 24-hour clock formats (HH:MM ) at which night service 1
is activated on the system.
Night Service End 1 (HHMM)
The time in 24-hour clock formats (HH:MM ) at which night service 1
is deactivated on the system.
97