Using Voicemail - Mitel 1000 Owner's Manual

Select 'Restriction classes'.
Select 'Night Class of Service'.
Select the Class you want to assign to the extensions, (Class 1 –
Class 6).
Enter the extensions to be entered in this Class.
Press the Speakerphone Key to finish programming.
To allow extensions use System Speed Dials overriding call
restrictions
You may wish to allow extensions to dial numbers entered in the
System Speed Dial list, which they are restricted from dialing
directly. For example, these could be numbers that extensions in
Classes 2, 3 or 4 cannot dial directly. Entering these numbers into
the System Speed Dial list and activating this feature on the
extensions allows the restricted extensions to access these
numbers.
By default, this feature is not activated on any extension.
From the Programming Extension, press the PROGRAM Key
Press the Scroll Down Key ( ) until 'System programming' is
displayed.
Select 'System programming'.
Enter the System Programming Password and select 'Extensions'.
Press the Scroll Down Key ( ) until 'Sys. Speed no. override' is
displayed.
Select 'Sys. speed no. override'
Select the extensions on which you wish to activate the feature.
Those extensions allowed to dial System Speed Dial numbers not
normally appropriate to their Class of Service are indicated by a ♦.
Press the Speakerphone Key to finish programming.
Numbers in an extension's Personal Speed Dial list cannot
override the Class of Service restriction of the extension
Note

Using Voicemail

Voicemail
Voicemail common parameters
Up to 8 extensions can be allocated voice boxes.
The maximum number of messages that can be stored in a Mailbox
is 20 at power up. This number is programmable from 10 to 50
messages.
The maximum message and Greeting length is programmable
between 60-180 seconds. The time allocated at Power Up is 120
seconds.
Unretrieved messages are deleted in 15 days and retrieved
messages are deleted in 3 days.
An extension must be allocated a Voice Mailbox before it can use
voicemail. In default, extensions are not allocated a Voice Mailbox.
To allocate a Voice Mailbox to an extension
From the Programming extension, press the PROGRAM Key
171