Mitel 1000 Owner's Manual page 60

Dial the number you require.
To change your extension Lock Password
From the Idle Menu, press the Scroll Down Key ( ) until 'Extension Lock' is
displayed.
Select 'Extension Lock'.
Select 'Change the lock code'.
Dial the existing 3-digit Lock Password. The default password is 321.
Dial your new 3-digit Lock Password. The new Lock Password will not be
displayed when entered.
Press the Speakerphone Key to finish programming.
From a standard telephone, the code is 714.
To examine Extension Lock Passwords
For configuration via the web interface, see page 103.
For configuration via the Featurephone interface, see page 162.
Alarm call
This feature enables you to set your extension to ring at a given time.
To set your extension to give you a Alarm call at a given time
From the Idle Menu, press the Scroll Down Key ( ) until 'Alarm call' is
displayed.
Select 'Alarm call'.
Enter the time in the 24-hour clock format, for example, 0930 for 9.30 am.
At the programmed time the extension will give ten rings. If not answered, it
will ring twice more at two-minute intervals and will then cancel.
Alarm calls must be set daily and therefore cannot be set more than 24hrs
ahead.
To review and cancel a Alarm call
To review an Alarm call, select 'Alarm call' and the time set will be displayed.
Select 'Confirm' to retain the programmed time. If you wish to change the
time, select 'Change' and enter a new time.
To cancel the alarm call, select 'Change' followed by 'Confirm'.
From a standard telephone, the code 718 is used to set a Alarm call, and the
code 718* is used to cancel it. A standard telephone cannot query the Alarm
call time.
Extension Reset
You can reset your extension to cancel all the following features if they have
been set:
Do Not Disturb
Call Forward
Call Back
Alarm call
To reset your Featurephone
From the Idle Menu, press the Scroll Down Key ( ) to scroll downwards until
'Reset the telephone' is displayed.
60