Conversion To Top Outlet - Valor 530XAN Installation And Owner's Manual

9.4 Conversion to Top Outlet

For Solid Direct Vent Piping
If installing with rear vent outlet go to next step.
1. Remove the top plate and seal by unscrewing 12 screws.
(See figure 44).
Keep the seal, plate and screws for fitting to the back.
2. Remove the rear outer vent collar and seal by unscrewing 12
screws (See figure 44).
3. Remove the rear inner vent collar and seal by unscrewing 8
screws. (See figure 44).
4. To make sure that the collars are axially aligned, fit the
adapter #817VAK over the outer vent collar. See figure 45.
5. Position the inner collar and seal vertically inside the top of
the appliance. Drop the outer collar with adapter over the inner
collar to ensure alignment. Secure the inner collar with 8 screws
and the outer collar with 12 screws. See figure 45.
6. Fit the plate and seal (which was previously removed from
the top) to the back of the appliance with 12 screws. See figure
44.
Figure 45
Figure 44
29 of 50