Table of Contents
Advertisement
Quick Links
Please read this manual before installing and operating this heater.
USE THIS MANUAL IN CONJUNCTION WITH THE MANUAL SUPPLIED
WARNING: If the information in these
instructions is not followed exactly, a fire
or explosion may result causing property
damage, personal injury or loss of life.
Do not store or use gasoline or other
flammable vapours and liquids in the vicinity
of this or any other appliance.
WHAT TO DO IF YOU SMELL GAS
• Do not try to light the appliance.
• Do not touch any electrical switch; do not
use any phone in your building.
• Immediately call your gas supplier from
a neighbor's phone. Follow the gas
supplier's instructions.
• If you cannot reach your gas supplier, call
the fire department.
Vous pouvez vous procurer un exemplaire français de ce manuel auprès de votre marchand.
4000343/03
530 B-VENT
GAS FIREPLACE HEATER
Installation & Operating
Instructions
This manual should remain with the homeowner.
WITH THE 530X ENGINE
Manufactured by
MILES INDUSTRIES LTD.
British Columbia, Canada
www.milesfireplaces.com
Installation and service must be performed
by a qualified installer, service agency or the
gas supplier.
This appliance is a domestic room-heating
appliance. It must not be used for any other
purposes such as drying clothes, etc.
This appliance is suitable for installation in a
bedroom or bed sitting room.
Advertisement
Table of Contents
Related Manuals for Valor 530 B-Vent
Summary of Contents for Valor 530 B-Vent
- Page 1 530 B-VENT GAS FIREPLACE HEATER Installation & Operating Instructions Please read this manual before installing and operating this heater. This manual should remain with the homeowner. USE THIS MANUAL IN CONJUNCTION WITH THE MANUAL SUPPLIED WITH THE 530X ENGINE Installation and service must be performed...
-
Page 2: Safety And Warning Information
Safety and Warning Information READ and UNDERSTAND all instructions This unit MUST be used with a vent system carefully before starting the installation. as described in this Installation manual. NO FAILURE TO FOLLOW these installation OTHER vent system or components MAY BE instructions may result in possible fire hazard USED. -
Page 3: Dimensions And Clearances
Options Heater engine unit #530XAN/P/XCN/P and B-vent conversion kit #552BVK is used with all installations. The 530 B-Vent installation requires the cast iron stove #531CSB—Cast Stove Black. Additional optional features Circulating Fan Kit #555CFK. Having variable speed and temperature control, it is designed to boost the natural convection process through the appliance. - Page 4 General Approvals & codes This appliance is certified by International Approval Services for use in Canada and the USA. The appliance is for installation connected to an approved 4” metal B type vent. This appliance is supplied for use with natural gas. It can be converted for use with LP gas with Kit #554LPK.
-
Page 5: Supply Gas
Supply Gas • All appliances are supplied for installation with natural gas. The supply pressure must be between the limits shown in section Ratings of this manual. • The supply connection is 3/8’’NPT. • The opening for the gas supply line is at the rear left corner of the appliance. Pack Contents #552BVK B-Vent Conversion Kit B-vent adapter unit with vent switch... -
Page 6: Appliance Preparation
Appliance Preparation Detach the window. Refer to the Installation Instructions supplied with the 530 Engine. Check ignition spark. Refer to the Installation Instructions supplied with the 530 Engine. B-Vent Conversion Kit Installation Remove 4 screws from the case back (2 each Remove the rear outlet vent collar and seal side just outside of the cover plate). - Page 7 Adapting Burner Module Fit the thermocouple interrupter block to the Detach the battery shield by removing two valve. Do not overtighten. Finger tighten ap- screws. proximatively 1/4 of a turn. Detach the burner module by removing 11 screws. Fit a “P” clip at the right side of the inside of the case.
-
Page 8: Venting & Appliance Fixing
Attaching top air deflector Refer to the Installation Instructions supplied with the 530 engine. Floor Fixing Refer to the Installation Instructions supplied with the 530 engine. Venting & Appliance Fixing Refer to the Installation Instructions supplied with the 530 engine. Gas Supply Installation Refer to the Installation Instructions supplied with the 530 engine. -
Page 9: Operation Checks
Operation Checks Burner operation Refer to the Installation Instructions supplied with the 530 Engine. Aeration adjustment Refer to the Installation Instructions supplied with the 530 Engine. Venting A check for correct venting of combustion products must be made before the installed heater is left with the customer.