Valor PORTRAIT 536CXBI Installation And Owner's Manual

President Cast Front Insert Model
Approved for use with Valor heater model 530 only
Requires the use of a 582CPB or 583CPB Closure Plate (sold seperately)
DANGER
!
A barrier designed to reduce the risk of burns from the hot
viewing glass is provided with this appliance and shall be
installed for the protection of children and other at-risk
individuals.
Applications
The President Cast Front for Insert 536CXBI is
intended to install on the Valor Portrait 530 heater
when installed as an insert fi replace.
The Valor model 530 heater with the 536CXBI
President Cast Front and 582 or 583 Closure Plate
comes ready for installation as an insert unit into
existing solid-fuel burning fi replaces provided space
and local codes permit.
4005304-01
©2015, Miles Industries Ltd.
P
ORTRAIT
536CXBI
Installation and Owner's Manual
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
I NS TAL LE R
Leave this manual
with the appliance.
CO NS UM E R
Retain this manual for
future reference.
Notes: This kit must be installed
or serviced by a qualifi ed installer,
service agency or gas supplier.
These instructions are to be used
in conjunction with the main
installation instructions for the
above listed heater models.