Venting Configurations - Valor 530XAN Installation And Owner's Manual

5.5 Z.C VENTING CONFIGURATIONS ( ALL FRONTS)
5.5.1 Flat on wall (Fig. 28)
Requires standard vent kit #551DVK only.
The horizontal vent run cannot be extended by the use of any vent
accessory pipes.
Figure 28
5.5.2 Flat on wall with snorkel termination
(all fronts) (Fig. 29)
For use on horizontal vent installations where the outside
ground level is too close to the standard terminal. Adapter
#817VAK, a pipe length and snorkel termination will be
required (See vent options section of this manual).
Figure 29
19 of 50