Installation Of Fronts And Components - Valor 530XAN Installation And Owner's Manual

18.0 INSTALLATION OF FRONTS AND COMPONENTS

18.1 PRESIDENT 531 FS FRONT
18.1.1 531 Kit Contents
Top pack ( Box 1)
1 Top casting
1 Top infill plate
Side's pack ( Box 2)
1 Front casting unit
2 Side casting units
1 Top air deflector
2 Wall spacer brackets
2 Self cutting screws
4 Machine screws
4 Washers
18.1.2 531 Kit Installation
Ensure ceramics and window are installed before
assembling casting.
1. Attach stand-off spacers.These spacers
need not be fitted if the rear of the
appliance is more than 1
any combustible material.( see fig 78)
2. Install Top Air Deflector using 2 screws
supplied.( see fig 79)
3. Bolt left and right side castings in place
using the bolts and washers supplied.( see
fig 82 )
4. Hang the front casting by the hooks at the
four corners. ( see fig 81)
5. Fit the top casting making sure that the corners locate as shown.(
see fig 81 )
6. Fit the top infill casting (If rear vent connection). (see figure 83)
7. If necessary the appliance can be leveled by the adjustment bolts at the
back of the side castings. (see figure 80).
fig 80, Levelling Legs
1
/ " (32mm) from
4
Fig 78, Rear Wall
Spacer
Fig 81, Installing Front & Top Castings
41 of 50
Fig. 77, 531 Kit Components
Fig 79, Installing Top Air Deflector
Fig 82, Mounting Side Castings
Fig 83, Top Infill casting