5.5.12 Top vent connection,
corner location,
vertical rise,
horizontal
termination, 45° pipe
bend (all fronts)
(Figs 35 & 37)
Can be used with either #551DVK
standard vent kit or another terminal
cap and accessories.
Adapter #817VAK, two 45° elbows,
one 90° vent elbow and pipe lengths
will be required. (See venting section
of this manual).
All vertical dimensions and clearance
limits are as section 5.5.9.
5.5.13 Top vent connection,
vertical vent rise, through the roof
termination
(all fronts)(Fig. 38)
Adapter #817VAK, two 45° elbows, pipe lengths, a
vertical vent terminal and roof flashing will be required.
Various other ceiling or roof items may be necessary
depending on the particular installation (See venting
options section of this manual).
Figure 37
Figure 38
23 of 50