Heater Pack Contents - Valor 530XAN Installation And Owner's Manual

8.0 PACK CONTENTS( Heater/Engine & Accessories)
#530 Engine unit (Either log or coal version supplied)
1 Appliance engine unit fitted with window
2 Restrictor plates type #1 for log versions
2 Restrictor plates type #2 for log versions
2 Restrictor plates type #3 for log versions
2 Restrictor plates type #4 for coal versions
2 Restrictor plates type #5 for coal versions
2 Restrictor plates type #6 for coal versions
1 Port cover
1 Gas inlet pipe connection adapter
1 Firebox ceramic rear wall
2 Firebox ceramic sidewalls
5 Ceramic fuel effects (logs or coals)
4 Wood screws
4 Wall plugs
2 Thread cutting screws
1 Deluxe remote control kit incl. receiver and handset
Take care when removing the contents from the packaging to prevent damage. Check that all the contents are in the packs and
are undamaged.
#551DVK Standard horizontal through the wall vent
kit (Alternative to Dura-vent unit)
1 Vent pipe & terminal unit
2 Wall plates
2 Wall shields (Supplied flat)
12 Thread cutting screws
1 Styrofoam cutting support do-nut
8 Wood screws
8 Wall plugs
#552 BVK B-vent adapter kit
1 Rear mounted, 4" dia top discharge draft hood
1 Restrictor plate
1 Vent safety switch & interrupter block
#555CFK Circulating fan kit (Additional option)
Details are with the kit
#556 CLA Co-Linear Adapter
1 4" dia replacement exhaust spigot
1 4" dia. Fiber gasket
1 Replacement outer vent plate with two 3" dia collars.
27 of 50