Recessed Insert Applications - Valor 530XAN Installation And Owner's Manual

6.0 Rear or Top Outlet Conversion to co-linear liners
using 556 CLA Co-Linear Adapter. ( all fronts )
( Simpson DuraVent 923 GCL may also be used as an alternate to
the 556 CLA)
Only for use when retrofitting a non-combustible fireplace and chimney.
The appliance must not be connected to a chimney flue serving a separate
solid-fuel burning appliance.
Requires 556 CLA Co-Axial to Co-Linear appliance adapter ( or
alternatively, a 923 GCL), two lengths of 3" dia. flexible chimney liner ,
co-linear termination kit and flashing and either high wind vertical vent
terminal cap or a low profile vertical termination cap . Zero Clearance
stand-offs and insulation pads, supplied with the various fronts are not
required for this application. A model 3336 Closure Plate is available to
cover fireplace openings.
556 CLA Kit Components
556 CLA Rear Mounted
991 High Wind Cap

6.0 Recessed Insert Applications

923 GCL Adapter
( alternate to 556 CLA)
556CLA Top Mounted
980 Low Profile Cap
25 of 50
Co-Linear Installation into Existing F/P
3336 CP Closure Plate ( 536 & 541 Fronts)
923 GK Termination