Table of Contents
Advertisement
5.1 Framing -General
The framing dimensions vary with the different cast iron fronts and with different vent configurations, allowing for elbows
etc. Read framing drawings carefully.
5.2 Finishing- General
The President 536 and Bolero 541 Fronts come supplied with a Framing Plate for zero clearance applications. The Framing
Plate is painted black and may be left exposed beyond the perimeter of the of the cast iron front or may be covered with non-
combustible material if desirable ( see figs 24 &25 ). Windsor Arch 539 Front comes with an integral back plate ( see fig 3)
•
A non-combustible hearth is not necessary in front of this appliance.
•
The appliance is approved to install directly on wood sub- flooring
•
Any framing construction must be clear of standoffs (See figures 1-4 ).
•
Be aware of the area 7
Fronts must be constructed with non-combustible materials as shown in figures ( 22 &23 ).
5.3 President 536/ Bolero 541 Fronts
Fig 22, Rear Vent Framing, 536/541 Fronts
Fig 24, Framing Plate Exposed, 536/541 Fronts
5.0 LOCATION –ZERO CLEARANCE
1/
" x 26¼" (19cm x 67cm) immediately above the Framing Plate used with the 536/541 Cast
2
Fig 23 , Top Vent Framing, 536/541 Fronts
Fig 25, Framing Plate covered, 536/541 Fronts
17 of 50
.
Hide quick links:
Advertisement
Table of Contents
