Valor 530XAN Installation And Owner's Manual page 13

4.2.9 Rear vent connection, installed
to fireplace chimney with co-
linear liners (Fig.14)
Only for use when retrofitting a non-combustible
fireplace and chimney.
The appliance must not be connected to a chimney
flue serving a separate solid-fuel burning
appliance.
Requires 556 CLA Co-Axial to Co-Linear
appliance adapter, two lengths of 3" dia. flexible
chimney liner, co-linear termination kit and
flashing and either high wind vertical vent
terminal cap or a low profile vertical termination
cap .(See vent options section of this manual).
4.2.10 Rear Vent Conversion to B-Vent
using 552 BVK Adapter
Free Standing Only ( Fig 15)
Used to field convert heater from direct vent to 4"
dia. gravity vent on free standing units only . A
full installation and operating manual is supplied
with the kit.
Figure 14
552 BVK Adapter
Fig 15.
13 of 50