A.1
Introduction
Several kits are available from Comtech EF Data to mount and install HPOD 1:1 or 1:2 Redundancy Systems, tailored to the operational
frequency of the system. The figures and tables provided in the subsections that follow provide examples of these currently available kits.
Once all system kit components have been assembled, and all interconnecting RF and M&C cables have been installed, see Appendix B.
1:1 AND 1:2 REDUNDANCY OPERATION for further information about configuring, operating, and troubleshooting your HPOD 1:1 or 1:2
Redundancy System.
Appendix A. REDUNDANCY SYSTEM
ASSEMBLY KITS
A–1