Table of Contents
Advertisement
HPOD C-, X-, Ku-Band High-Power Outdoor Amplifier
Appendix C
C.2
Replacing the Power Supply
C.2.1 Removing the Old Power Supply
The SSPA/power supply interconnection is waterproof only when the power supply and
SSPA are mated. When exposed, the connection is only water‐resistant. Do not leave the
SSPA or power supply exposed to the elements unless properly mated and assembled.
To remove the power supply:
Step
Task
1
Disconnect power from the HPOD SSPA.
2
Loosen the four captive fasteners as indicated in Figure C-1.
3
The supply can now be pulled from the SSPA.
Figure C-1. HPOD Power Supply Replacement
Be sure to use an appropriate screwdriver, such as the one provided with
the SSPA, to avoid damaging the fasteners.
C–2
Revision 6
MN/HPOD.IOM
Advertisement
Table of Contents
