HPOD C-, X-, Ku-Band High-Power Outdoor Amplifier
External Connectors and Pinouts
2.6
Energizing the HPOD SSPA
Never turn the unit ON without proper waveguide termination on the J2 RF
OUTPUT port. Individuals can be exposed to dangerously high electromagnetic
levels.
The HPOD SSPA does not contain a 'Power On/Off' switch. The SSPA is powered ON by
connecting the J3 | AC IN Power connector to the appropriate prime power source. The Mute or
Transmit status of the SSPA will automatically come up in the last stored state (factory default =
Transmit on, not muted).
Figure 2-4. HPOD Unit
2–9
Revision 6
MN/HPOD.IOM