Comtech EF Data HPOD Installation And Operation Manual page 99

HPOD C-, X-, Ku-Band High-Power Outdoor Amplifier
Serial-Based Remote Product Management
Command
Parameter Number of
(Instruction
Type Arguments
& Qualifier)
IP Address IPA= 18 bytes
Gateway IPG= 15 bytes
Address
Unit MAC N/A 17 bytes
Address
Time Protocol TPE 1 byte,
Enable value of 0,1
Time Protocol TPS 15 bytes
Server
Description of Arguments
Command or Query.
Set the IP address and network prefix for the 10/100 BaseT Ethernet management port, in the form
aaa.bbb.ccc.ddd.yy where:
aaa = 0-223
bbb = 0-255
ccc = 0-255
ddd = 001-255
yy = 08-30
Default Value: 192.168.001.004.24
Example: 192.168.001.004.24
Command or Query.
Set the Gateway IP address for the 10/100 Base Tx Ethernet management port, in the form
aaa.bbb.ccc.ddd, where:
aaa = 0-223
bbb = 0-255
ccc = 0-255
ddd = 001-255
Default Value: 192.168.001.005
Example: IPG = 192.168.001.005
Query only.
Reports, in hexadecimal, the MAC address of the unit.
Example: MAC=00-06-B0-00-D2-A7
Command or Query.
Enables or Disables the Time Protocol, in the form x, where:
0 = Time protocol disabled
1 = Time protocol enabled
Example: TPE=1 (Time protocol enabled)
Command or Query.
Sets or returns the Time Server IP address for the unit Tx Ethernet management port, in the form
aaa.bbb.ccc.ddd, where:
aaa = 0-223
bbb = 0-255
ccc = 0-255
ddd = 001-255
Default Value: 255.255.255.255
Example: IPG = 192.168.001.005
5–19
Revision 6
MN/HPOD.IOM
Query
Response to
(Instruction Response to Query
Command
& Qualifier)
IPA= IPA? IPA=
IPA? aaa.bbb.ccc.ddd.yy
IPA* (see Description of
IPA# Arguments)
IPG= IPG? IPG =
IPG? aaa.bbb.ccc.ddd
IPG* (see Description of
Arguments)
MAC= MAC? MAC=
MAC* xx-xx-xx-xx-xx-xx
(See Description of
Arguments)
TPE= TPE? TPE=x
TPE?
(See Description of
Arguments)
TPS? TPS=
TPS=
TPS? aaa.bbb.ccc.ddd
(see Description of
Arguments)