D Rtty Decode Set Mode - Icom IC-7800 Instruction Manual

4
RECEIVE AND TRANSMIT

D RTTY decode set mode

[F-3•Ω ≈] [F-7•WIDE]
[F-1•Y] [F-2•Z][F-4•DEF]
• RTTY decode set mode screen
Turn the letter code decoding after receiving a "space"
(USOS; UnShift On Space function) capability ON
and OFF.
Selects the new line code of the internal RTTY de-
coder.
CR: Carriage Return, LF: Line Feed
Selects the diddle condition.
Selects the FIGS insertion even changing from LTRS
to FIGS does not necessary when sending a numeral
or symbol character after a space.
Selects the automatic new line code (CR+LF) trans-
mission capability.
[EXIT/SET] Main dial
4-18
This set mode is used to set the decode USOS func-
tion, time stamp setting, etc.
• Setting contents
q During RTTY mode operation, push [F-3•DECODE]
to select RTTY decode screen.
w Push [F-1•<MENU2>] to select RTTY decode menu
2, then push [F-6•SET] to select RTTY decode set
mode.
• Push [F-7•WIDE] to toggle the screen size from normal
and wide.
e Push [F-1•Y] or [F-2•Z] to select the desired set
item.
r Set the desired condition using the main dial.
• Push [F-4•DEF] for 1 sec. to select a default condition
or value.
• Push [F-3•Ω ≈] to select the set contents for some
items.
t Push [EXIT/SET] to exit from set mode.
• ON : Decode as letter code.
• OFF : Decode as character code.
• CR,LF,CR;LF : Makes new line with any codes.
• CR+LF : Makes new line with CR+LF code
only.
• BLANK : Transmits blank code during no code
transmission.
• LTRS : Transmits letter code during no code
transmission.
• OFF : Turns the diddle function OFF.
• ON : Inserts FIGS.
• OFF : Not insert FIGS.
• ON : Transmits CR+LF code once.
• OFF : Transmits no CR+LF code.