Changing The File Name - Icom IC-7800 Instruction Manual

■ Changing the file name

[F-4•Ω ≈]
[F-5•REN/DEL]
[F-1•DIR/FILE] [F-2•Y] [F-3•Z]
[F-6•MAKE]
[F-7•WIDE]/[F-7•CANCEL]
[EXIT/SET]
12-25
The file name, saved in the CF card, can be re-named
from the transceiver as desired.
q During setting save screen indication, push
[F-1•DIR/FILE] to selects tree view screen.
• Push [F-2•Y] or [F-3•Z] to select the desired folder.
• "DECODE," "SETTING" and "VOICE" folders are avail-
able as the default.
• After the folder is selected, push [F-2•Ω ≈] for 1 sec. to
display content folder(s), if available.
w Push [F-1•DIR/FILE] to select file list screen.
e Push [F-2•Y] or [F-3•Z] to select the desired file.
r Push [F-5•REN/DEL] momentarily to select the file
name edit condition.
t Push [ABC], [123] or [Symbol] to select the charac-
ter group, then rotate the main dial to select the
character.
• [ABC] : A to Z (capital letters); [123]: 0 to 9 (numerals);
[Symbol]: ! # $ % & ' ` ^ + – = ( ) [ ] { } _ ~ @ can be se-
lected.
• Push [F-1•Ω] to move the cursor left, push [F-2•≈] to
move the cursor right, push [F-3•DEL] to delete a char-
acter and push [F-4•SPACE] to insert a space.
• Pushing the transceiver's keypad, [0]–[9], can also enter
numerals.
y Push [EXIT/SET] to set the file name.
12
SET MODE