Setting Sleep Timer; Timer Operation - Icom IC-7800 Instruction Manual

11
CLOCK AND TIMERS

■ Setting sleep timer

[F-4•CLR]
[TIMER]

■ Timer operation

[TIMER] [POWER]
[F-7•SLEEP]/[F-7•SET]
[EXIT/SET] Main dial
The sleep timer turns the transceiver power OFF au-
tomatically after passing the set period. The timer can
be set to 5–120 min. in 5 min. steps.
q Push [EXIT/SET] several times to close a multi-func-
tion screen, if necessary.
w Push [TIMER] for 1 sec. to select timer set screen.
e Push [F-7•SLEEP] to select the sleep timer set con-
dition.
• "– – –" blinks.
r Set the desired time period using the main dial.
• "TIMER–set Push [SET]" blinks.
• Push [F-4•CLR] to select "– – –" to cancel the setting.
t Push [F-7•SET] to set the time.
• Push [EXIT/SET] to cancel the setting.
• The timer indicator above [TIMER] switch lights green.
y Push [EXIT/SET] to exit timer set screen.
u The transceiver emits 10 beeps and turns OFF after
the sleep timer period elapses.
• The timer indicator blinks while beeping.
• Push [TIMER] momentarily to cancel the sleep timer, if
desired.
q Preset the daily timer as described previously.
w Push [TIMER] momentarily to turn the timer function
ON.
• The timer indicator above this switch lights green when
the timer function is ON.
e Push [POWER] for 1 sec. to turn the power OFF.
• The timer indicator lights continuously.
r When the set time arrives, the power is automati-
cally turned ON.
t The transceiver emits 10 beeps and turns OFF after
the power-off period elapses.
• The timer indicator blinks while beeping.
• Push [TIMER] momentarily to cancel the sleep timer, if
desired.
The timer action in timer set screen must be se-
lected ON to enable the timer operation, described
in page 11-3 steps r.
11-4