Display Set Mode - Icom IC-7800 Instruction Manual

12
SET MODE

■ Display set mode

Sets the memory name indication, during memory
mode operation, ON and OFF. (default: ON)
Turns the pop-up indication capability when the filter
width for the APF is changed from ON and OFF.
(default: ON)
Turns the pop-up indication capability when the notch
filter width is changed from ON and OFF.
(default: ON)
Select "ON" when the external display is connected.
(default: OFF)
Selects the suitable pulse level for the connected ex-
ternal display from H and L. (default: H)
Turns the opening message screen indication capa-
bility ON and OFF. (default: ON)
Sets the desired 10-character text, such as your call
sign, name, etc.
The set text is indicated in the opening screen.
Capital letters, small letters, numerals, some symbols
(– / . @) and spaces can be used.
(continued)
• ON : The programmed memory name is displayed
• OFF : No memory name is displayed even a mem-
• At least 800×600 pixel resolution is required for the dis-
z Push [F-5•EDIT] to select the name edit condition.
x Push [ABC], [abc], [123] or [Symbol] to select the
c Push [EXIT/SET] to set the name.
12-12
above the frequency indication.
ory name is programmed.
play.
• The 1st character and cursor blink.
character group, then rotate the main dial to select
the character.
• Push [ABC] or [abc] to toggle capital and small letters.
• Push [123] or [Symbol] to toggle numerals and sym-
bols.
• Push [F-1•Ω] or [F-2•≈] for cursor movement.
• Push [F-3•DEL] to delete the selected character.
• Push [F-4•SPACE] to input a space.
• Pushing the transceiver's keypad, [0]–[9], can also
enter numerals.