Icom IC-7800 Instruction Manual page 152

12
SET MODE
■ ACC set mode
Selects the transceiver's reference signal condition
from IN, OFF and OUT.
Adjusts the internal reference signal frequency within
0 to 100% range in 1% steps during frequency cali-
bration. (default: 50%)
(continued)
12-10
• IN : Use an external reference signal for the IC-
7800.
• OFF : Not input/output the reference signal.
(default)
• OUT : Outputs the IC-7800 reference signal to ex-
ternally connected equipment(s) for their ref-
erence.
NOTE: When the applied reference signal has off-
frequency, the IC-7800 may not work properly.