Memory Channels; Section 8 Memory Operation ■ Memory Channels; Memory Channel Selection; D Using The [Y]/[Z] Keys - Icom IC-7800 Instruction Manual

8
MEMORY OPERATION

■ Memory channels

MEMORY
MEMORY
CHANNEL
CHANNEL
NUMBER
Regular memory
channels
Scan edge
memory
channels

■ Memory channel selection

D Using the [Y]/[Z] keys

D Using the keypad

CAPABILITY
One frequency and one mode
1–99
in each memory channel.
One frequency and one mode in
P1, P2 each memory channel as scan
edges for programmed scan.
[Y] [Z] [V/M]
Keypad
[Y] [Z] [V/M] [F-INP•
ENT
The transceiver has 101 memory channels. The mem-
ory mode is very useful for quickly changing to often-
used frequencies.
All 101 memory channels are tuneable which means
the programmed frequency can be tuned temporarily
with the main dial, etc. in memory mode.
TRANSFER
TO VFO
Yes
Yes
q Push [V/M] to select memory mode.
w Push [Y]/[Z] several times to select the desired
memory channel.
• Push and hold [Y]/[Z] for continuous selection.
• [UP] and [DN] on the microphone can also be used.
e To return to VFO mode, push [V/M] again.
q Push [V/M] to select memory mode.
w Push [F-INP•
ENT
e Push the desired memory channel number using the
keypad.
• Enter 100 or 101 to select scan edge channel P1 or P2,
respectively.
r Push [Y] or [Z] to select the desired memory chan-
nel.
[EXAMPLE]
]
To select the memory channel 3;
- Push [F-INP• ], [7•3], then push [Y] or [Z].
ENT
To select the memory channel 12;
- Push [F-INP•
ENT
[Z].
To select the scan edge channel P1;
- Push [F-INP•
ENT
[Y] or [Z].
To select the scan edge channel P2;
- Push [F-INP•
ENT
[Y] or [Z].
8-2
OVER-
CLEAR
WRITING
Yes
Yes
].
], [1.8•1], [3.5•2], then push [Y] or
], [1.8•1], [50•0], [50•0], then push
], [1.8•1], [50•0], [1.8•1], then push
Yes
No