D Receiver; Options; D Antenna Tuner - Icom IC-7800 Instruction Manual

Hide thumbs Also See for IC-7800:
Table of Contents

Advertisement

D Receiver

• Receive system
• Intermediate frequencies
• Sensitivity
SSB, CW, RTTY (BW=2.4 kHz, 10 dB S/N)
AM (BW=6 kHz, 10 dB S/N)
FM (BW=15 kHz, 12 dB SINAD)
• Selectivity
SSB, RTTY (BW=2.4 kHz)
CW (BW=500 Hz)
AM (BW=6 kHz)
FM (BW=15 kHz)
• Spurious and image rejection ratio
• Squelch sensitivity
SSB, CW, RTTY, PSK31
FM
• RIT variable range
• Audio output power
• PHONES connector
• EXT-SP connectors

D Antenna tuner

• Matching impedance range
• Minimum operating input
• Tuning accuracy
• Insertion loss (after tuning)
*The LCD display may have cosmetic imperfections that appear as small or dark spots. This is not a malfunction
or defect, but a normal characteristic of LCD displays.
Spurious may be received near the following frequencies. These are made in the internal circuit and does not
indicate a transceiver malfunction.
• 0.150 MHz
• 10.490 MHz
All stated specifications are typical and subject to change without notice or obligation.
: Double conversion superheterodyne system
:
1st
64.455 MHz (MAIN band)
64.555 MHz (SUB band)
2nd
36 kHz
:
0.100–1.799 MHz
0.5 µV
1.800–29.990 MHz
0.16 µV
50.000–54.000 MHz 0.13 µV
0.100–1.799 MHz
6.3 µV
1.800–29.990 MHz
2 µV
50.000–54.000 MHz 1 µV
28.000–29.990 MHz 0.5 µV
50.000–54.000 MHz 0.32 µV
:
More than 2.4 kHz/–3 dB
Less than 3.6 kHz/–60 dB
More than 500 Hz/–3 dB
Less than 700 Hz/–60 dB
More than 6.0 kHz/–3 dB
Less than 15.0 kHz/–60 dB
More than 12.0 kHz/–3 dB
Less than 20.0 kHz/–60 dB
: More than 70 dB
:
Less than 5.6 µV
Less than 1 µV
: ±9.999 kHz
: More than 2.6 W
: 3-conductor 6.35 (d) mm (
: 2-conductor 3.5 (d) mm (
sub)
: 16.7 to 150 Ω unbalanced
(HF bands; VSWR better than 3:1)
20 to 125 Ω unbalanced
(50 MHz band; VSWR better than 2.5:1)
: 8 W
15 W
: VSWR 1.5:1 or less
: Less than 1.0 dB
15-3
SPECIFICATIONS AND OPTIONS
(pre-amp 1 ON)
(pre-amp 1 ON)
(pre-amp 2 ON)
(pre-amp 1 ON)
(pre-amp 1 ON)
(pre-amp 2 ON)
(pre-amp 1 ON)
(pre-amp 2 ON)
(except IF through on 50 MHz band)
at 10% distortion with an 8 Ω load
")
1
4
")/8 Ω×2
1
8
(HF bands)
(50 MHz band)
15
(for main and

Advertisement

Table of Contents
loading

Table of Contents