Level Set Mode - Icom IC-7800 Instruction Manual

■ Level set mode

Sets the bass level of the receive audio tone in FM
mode from –5 to +5. (default: 0)
Sets the treble level of the receive audio tone in FM
mode from –5 to +5. (default: 0)
Sets the transmission passband width for wide setting
by selecting the lower and higher frequencies.
Sets the transmission passband width for middle set-
ting by selecting the lower and higher frequencies.
Sets the transmission passband width for narrow set-
ting by selecting the lower and higher frequencies.
Sets the voice synthesizer audio output level from 0 to
100% in 1% steps. (default: 50%)
Sets the side tone output level from 0 to 100% in 1%
steps. (default: 50%)
Turns the side tone output level limiting capability from
ON and OFF. (default: ON)
Sets the key-touch beep output level from 0 to 100%
in 1% steps. (default: 50%)
Turns the key-touch beep output level limiting capa-
bility from ON and OFF. (default: ON)
(continued)
12-5
Lower freq. : 100 (default), 300 and 500 Hz
Higher freq.: 2500, 2700 and 2900 Hz (default)
Lower freq. : 100, 300 (default) and 500 Hz
Higher freq.: 2500, 2700 (default) and 2900 Hz
Lower freq. : 100, 300 and 500 Hz (default)
Higher freq.: 2500 (default), 2700 and 2900 Hz
12
SET MODE