2. Make sure all the necessary cables are attached properly to the host rear transition
module.
The following are possible board and rear transition module combinations:
Netra CP2140 and Netra CT CPU transition card (CTC, hereafter referred to as
■
rear transition module)
Netra CP2500 and Netra CP2500 RTM-H (rear transition module for host)
■
shows the connectors on the CTC.
FIGURE 4-6
RTM-H.
SCSI connector
TTY A
serial port
Ethernet
channel A
Ethernet
channel B
Cutout for
PIM connector
Connectors on the Netra CP2140 Host Rear Transition Module
FIGURE 4-6
FIGURE 4-7
TTY B
serial port
Chapter 4 Troubleshooting the System
shows connectors on the
4-21