Preparing The New Carry Handle - Barco CLM HD8 R9050130 User Manual

E. Mounting optional Carry handle
Image E-2
Stacking points mounted
E.2

Preparing the new carry handle

What has to be done?
The back stacking point must be removed before the carry handle can be mounted on the CLM projector. The fixation hole for the
fixation bolt of the carry handle is covered by the stacking point construction.
How to remove the stacking point construction
1. Turn out the 4 bolts, 2 on each side. Be aware that there is a nut for each bolt on the inside of the carry handle.
Image E-3
Remove stacking point construction
180 R59770057 CLM HD8 16/07/2007