Table of Contents
Advertisement
Image 16-9
Take out the lamp
For recycling guidelines of the lamp, see "Recycling guidelines", page 9.
16.6 Mounting a new lamp unit
About the lamp units
All four lamp units are equal. A spare lamp can be inserted in any position without problems. See "Order info", page 185 for the
order numbers.
W
ARNING
C
AUTION
pressure, the lamp may explode in either hot or cold states if improperly handled. For recycling guidelines,
see "Recycling guidelines", page 9.
C
AUTION
lamp.
Never touch the UV filter when a lamp is removed.
Necessary tools
No tools.
How to insert a lamp unit
1. Insert the lamp vertically into the housing, with the front of the lamp facing the middle of the projector.
R59770057 CLM HD8 16/07/2007
:
This procedure may only be performed by qualified technical service personnel.
:
Never attempt to disassemble the lamp from its housing or to dispose of it. Due to its high internal
:
Never touch the reflector or the lamp bulb with your fingers. That will reduce the lifetime of the
16. Servicing
157
Advertisement
Table of Contents
