Table of Contents
Advertisement
14. Service menu
3. Use the ▲ or ▼ key to select Restore factory defaults and press ENTER.
The factory defaults confirmation window opens.
4. Use the ▲ or ▼ key to select Yes or No and press ENTER.
If you are sure to restore the factory defaults and to erase the custom settings, select Yes.
If you are not sure, select No.
Image 14-34
14.6 Save custom settings
What is done?
The current custom settings can be saved to the internal backup device in the same way as it would be done when the projector
was switched to standby.
How to save
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Service and press ENTER.
The service window opens.
3. Use the ▲ or ▼ key to select Save custom settings and press ENTER.
The custom settings are written to the internal backup device. A message menu "Save data ..." is displayed during the save
operation.
Image 14-37
148
Image 14-35
Image 14-38
Image 14-36
R59770057 CLM HD8 16/07/2007
Advertisement
Table of Contents
