Table of Contents
Advertisement
Image 16-2
Front filter replacement
4. Insert a new HEPA filter by pulling the spring clamp away and insert the filter into its position. Release the spring clamp.
5. Reinstall the front cover of the projector, see "Installation of the front cover", page 163.
C
AUTION
C
AUTION
16.3 Lens installation
How to install the lens
1. Remove the front cover of the projector. See "Removal of the front cover", page 161.
2. Remove the foam rubber in the opening of the lens holder if not yet removed.
3. Place the lock handle A is in its right position (table mounted projector).
R59770057 CLM HD8 16/07/2007
:
Never install a used HEPA filter. Always install a new HEPA filter.
:
Never use the projector with a removed cover. Always reinstall the removed cover.
16. Servicing
A
B
C
153
Advertisement
Table of Contents
