Minimum Delay - Barco CLM HD8 R9050130 User Manual

8. Input menu
Image 8-5
When:
None
Automatic
Input 1
Input 2
8.4

Minimum delay

Purpose
In normal mode, the processing (scaling and de-interlacing) in DLP projectors introduces a few frames delay (from input to screen).
Setting the option Minimum Delay to "ON" disables all scaling and de-interlacing in the processing and reduces frame delay of the
projector (from input to screen) to ONE frame, caused by the formatter board (DLP technology restriction). The intended use of this
option is to apply native and progressive data to the projector and displaying it with minimum delay, using the full resolution of the
projector. Other formats will be displayed either unscaled and/or interlaced.
This feature can be used if additional delay in the projector is not acceptable. For instance if a projector is showing the DVI loop out
of another DLP or if an external scaler/de-interlacer does the processing.
How to toggle the delay?
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Input and press ENTER.
The Input menu is displayed.
3. Use the ▲ or ▼ key to select Minimum delay and press ENTER to toggle between [On] and [Off].
Image 8-8
60
Image 8-6
Output is locked on an internal sync (60 Hz)
Output is locked on the selected input for the main window
Output is locked on source 1
Output is locked on source 2
Image 8-9
Image 8-7
R59770057 CLM HD8 16/07/2007