Table of Contents
Advertisement
6. Getting started
2. Press LENS FOCUS button [-] or [+] (C) for an overall focus of the image.
3. Press ▲ LENS SHIFT ▼ button for correct vertical position of the image on the screen.
4. Press ◄ LENS SHIFT ► button for correct horizontal position of the image on the screen.
6.5.3
Quick picture in picture
Quick On - Off
Press on the PIP key on the remote control or the local keypad to activate the Load layout window.
Use the ▲ ▼ key to scroll to the desired layout and press ENTER to activate.
Select Main full screen to switch off PIP.
Image 6-10
6.6
Use of the AUTO button
What is possible?
The AUTO button can be configured as an auto align of the projected source or as an auto image button which calls a choice menu.
Within this choice menu, the user can execute an auto align of the image, an auto contrast/brightness and an auto phase.
To use this button, just press Auto on the remote control or the local key path.
When the button is configured as align only, the projected image will be aligned.
When the button is configured as auto image, the auto image menu will be displayed.
Image 6-11
Use the ▲ or ▼ key to select the desired function and press ENTER to activate.
6.7
Projector Address
6.7.1
Displaying and Programming addresses
Displaying the Projector Address on the Screen.
1. Press Address key (recessed key on the RCU) with a pencil.
50
R59770057 CLM HD8 16/07/2007
Advertisement
Table of Contents
