Replacement Of The Dust Filters On The Front Side - Barco CLM HD8 R9050130 User Manual

16. Servicing
Image 16-1
Filter top replacement
4. Insert a new HEPA filter first with the side next to the lamp housing and pull down the other side to lock the filter.
5. Reinstall the lamp door, see "Installation of the lamp door", page 164.
C
AUTION
C
AUTION

16.2 Replacement of the dust filters on the front side

Necessary parts
Two new HEPA dust filters.
How to replace the filters on the front side of the projector
1. Switch off the projector and unplug the power cord from the wall outlet.
2. Remove the front cover, see "Removal of the front cover", page 161.
3. Remove the HEPA filter on the front side by pulling the spring clamp (A) on the upper side away from the filter and then pivot the
filter a little ( B) and take it out (C).
152
:
Never install a used HEPA filter. Always install a new HEPA filter.
:
Never use the projector with a removed cover. Always reinstall the removed cover.
B
A
R59770057 CLM HD8 16/07/2007