Table of Contents
Advertisement
12. Alignment menu
The ScenergiX menu items are only accessible when status is [On].
How to set the blending zone?
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Alignment and press ENTER.
3. Use the ▲ or ▼ key to select ScenergiX and press ENTER.
4. Use the ▲ or ▼ key to select one of the four size adjustments and press ENTER.
Image 12-57
A pattern with the different areas is displayed.
Image 12-60
Width selections
5. Use the cursor keys to move the border of the overlap area to the desired position (value between 0 and 255).
Set first the width for the first projector and repeat for the second one.
122
Image 12-58
Image 12-59
R59770057 CLM HD8 16/07/2007
Advertisement
Table of Contents
