Scenergix Size Adjustment - Barco CLM HD8 R9050130 User Manual

Image 12-51
2. Enter value for vertical active (= Lact) as follows :
Lact = [(vert.. resolution of 1 projector)/(Total Vert. screen resolution)] x (Vert. resolution source)
3. Vertical start (= Lstart) remains the same.
Adjustment of Active lines (Lact) of second projector
1. Go to Image –> Timings menu of first projector.
Image 12-54
2. Enter value for vertical active (= Lact) as follows :
Lact = [(vert.. resolution of 1 projector)/(Total Vert. screen resolution)] x (Vert. resolution source)
3. Vertical start (= Lstart) = original start + [(Vert. resolution source) minus (newly calculated Lact)]
Example
Vertical resolution source : 1200 lines
Vertical resolution projector 1 & 2: 768 lines
Overlap : 50 lines
Total vertical screen size : 1486 lines
Lact projector 1 = (768 / 1486) x 1200 = 620 lines
Lact projector 2 = (768 / 1486/) x 1200 = 620 lines
Lstart projector 2 = Lstart projector 1 + (1200 – 620)

12.11.7 ScenergiX size adjustment

What can be done with the size menu?
The Top, bottom, left or right item set the blending zone.
R59770057 CLM HD8 16/07/2007
Image 12-52
Image 12-55
Image 12-53
Image 12-56
12. Alignment menu
121