Advanced Settings - Barco CLM HD8 R9050130 User Manual

9. Image menu
The timings menu will be displayed.
Image 9-63
4. To change a setting, use the ▲ or ▼ key to select and press ENTER.
The corresponding adjustment box is displayed. E.g. Horizontal total pixels.
Image 9-66
5. Use the ▲ or ▼ key (or ◄ or ► key) to change the value.
6. Press ENTER to activate the new value.
7. If necessary to change other settings, repeat from step 4.
9.5.2

Advanced settings

About the advanced settings
Clamp delay
Clamp width
Sync
pulse
Clamp
pulse
Image 9-67
Field polarity
80
Image 9-64
The time between the leading edge of the clamp pulse and the locked edge of the sync pulse. Can be
any value between 0 and 255.
The width of the clamp pulse can be any value between 0 and 255.
Clamp Clamp
delay width
The field polarity function is used for interlaced images. Both rasters of the image could be shifted in
a wrong way (double lines are visible in the image). This can be corrected by forcing the field polarity
to [neg] or [pos].
Image 9-65
R59770057 CLM HD8 16/07/2007