Preparing The Projector - Barco CLM HD8 R9050130 User Manual

E.3

Preparing the projector

C
AUTION
mounted.
What has to be done?
Before the carry handle can be mounted, the projector feet must be removed and an extra support point must be added.
How to handle
1. Turn the projector upside down.
2. Turn out the 3 feet. No tool is needed to turn out the feet.
Image E-4
3. Insert next to the removed back foot the extra support point.
4. Place a washer on it and insert a bolt. Secure the bolt.
Due to its construction, the support is still a bit movable.
Image E-5
Insert extra foot
5. Insert the small ring into the hole of the removed foot.
R59770057 CLM HD8 16/07/2007
:
Before turning the projector upside down, be sure the stacking points on the top cover are
E. Mounting optional Carry handle
181