17. PROJECTOR COVERS, REMOVAL AND
INSTALLATION
Overview
•
Removal of the front cover
•
Removal of the lamp door
•
Installation of the front cover
•
Installation of the lamp door
W
ARNING
17.1 Removal of the front cover
Necessary tools
Flat screwdriver
How to remove the front cover
1. Release the captive screw at the middle bottom of the front cover (a)
Image 17-1
Release captive screw
2. Release the front cover from the projector doing the following:
a) stand in front of the projector and pull the bottom side of the cover a little toward you (b)
b) In that slightly pivoted position, pull the cover downwards to release it from the top cover (c)
R59770057 CLM HD8 16/07/2007
:
The cover removal procedures may only be performed by qualified technical service personnel.
17. Projector covers, removal and installation
a
161