Alignment Of A Table Mounted Projector; Mounting The Bottom Carry Handler - Barco HDX-4K20 FLEX User Manual

The voltage meter is protected with a fuse (1A) which is located on the neutral bonding cable. If necessary to
replace this fuse, consult a service technician.

4.2 Alignment of a table mounted projector

How to align
1. Place the projector in the desired location. Take into account the zoom range of the used lens and the size
of the screen.
2. Project one of the internal hatch patterns on the screen.
3. Turn the adjustable feet in or out until the projected hatch pattern has a perfect rectangle shape and is
leveled.
Image 4–2 Level alignment
When this is achieved, the projector is set horizontal and vertical at right angles to the screen.
Image 4–3 Angle adjustment

4.3 Mounting the bottom carry handler

Required tools
Open wrench 17 mm
Required parts
4x bolt M10 x 16 mm
How to mount
1. Turn the projector upside down.
2. Turn out the 4 feet.
Physical Installation
R5906070 /16 HDX 4K 41